CYM Materiales manufactures equipment for the treatment of shot peening, Double Shot Peening and Stress Peening with abrasive impulsion carried out by pressure nozzles or centrifugal turbines according to the requirement of parts to be processed.

The shot peening process is mainly used in components subject to bending or torsional stresses, the following being the most common applications:

• CNC Robot for localized shot peening
• Aircraft components
• Axial compressors
• Cams and Crankshafts
• Chain Bolts and Side Bars
• Diaphragms or clutch discs
• Gearbox gears, crowns and pinions
• Shot-peening and stress peening of coil springs and leaf springs
• Torsion bars
• Mining Components - Rock Drills
• Components for the oil industry:
  • Sucker rods,
  • Threaded pipe connections
  • Vertical drilling tool shafts

Brief description of the shot peening process:

The shot-peening process is a particular case within the range of the shot blasting process, by means of which compressive stresses are induced in a metal surface, exposing it to a jet of spherical particles (shot) at high speed and keeping the parameters controlled. of the operation.

During the shot-peening process, in addition to producing the aforementioned effect, the surface is cleaned as in a normal blasting task, but this is only a secondary effect of the process, the basic purpose being to increase the fatigue resistance of the material. .

When the shot is propelled in a high speed flow, it impacts on a metal surface, forming a surface profile made up of rounded valleys and ridges and products of the plastic deformation of the metal during impact. This deformation extends between 50 and 250 microns in depth.

The effect obtained after shot-blasting constitutes the crushing of the metallographic grains on the metal surface. With this, there are two effects:

• The grains expand by compressing each other and causing the appearance of compressive stresses parallel to the surface. These compressive stresses cancel out residual stresses induced in previous processes such as machining, heat treatment, plastic shaping, etc. And they also oppose any tensile stress to which it is subjected in a subsequent use.
• As a secondary effect, when the grains widen, they cover the Inter spaces. granular, reducing them considerably and thus the rate of galvanic corrosion.

In summary, the shot peening process increases fatigue resistance, particularly coil and flat springs, strapping, stabilizer bars for cars, gearbox gears, transmission rings and pinions, aircraft parts and pieces, bits and drill rods. oil and mining companies, etc. and as a secondary effect, it produces an increase in corrosion resistance, the elimination of residual stresses by inducing a uniform compression stress over the entire surface, as well as cleaning it by shot blasting.

Related equipments

SHOT PEENING MACHINE FOR GEAR AND TRANSMISSION COMPONENTS	SHOT PEENING MACHINE FOR COIL AND LEAF SPRING	SHOT PEENING MACHINE FOR DIAPHRAGM AND PRELOAD SPRINGS CLUTCH

THREADED PIPE FITTINGS	Shot Peening Robot

VIDEOS RELACIONADOS

Shot Peening Conexiones Roscadas	Shot Peening DIscos de Embragues	Shot Peening Engranaje y Piñones	Shot Peening Robot

Photo Galery

X

< >

X

< >

X

< >

X

< >

X

< >

X

< >

X

< >

X

< >

X

< >

X

< >

X

< >

X

< >

X

< >