X

Hanger Type Machines - Batch & Continuous Overhead Rail Blast Machine

Hanger Type Machines  - Batch & Continuous Overhead Rail Blast Machine

Cym Materials SA manufactures spinning hanger shot blasting machines for a wide industrial range of products.   Ganchos Spinner hanger are very versatile since they allow processing different kinds of components, such as small and sensitive parts as well as more complex parts which may be heavy or large and therefore not suitable for tumbling in bulk loads.   At Cym we have equipment to process different load volumes and weights, and according to the requirements of each client, we offer different loading options in batch processes (CAB) or continuous overhead rail blast machine (TUN).    


Features Construction

  Blast Cabinet

  • External structure with robust and compact design made of SAE1010 steel
  • Different combinations of internal lining of the working chamber using the following materials
    • Abrasion resistant rubber
    • High Cr cast steel plates (?64RC )
    • MN Steel Plates (11% -14%)
  • Door of entry / exit of hooks
    • Double leaf door with manual or pneumatic opening
    • Sliding door with motorized opening
  • Bottom auger with hardened steel turns
  • Pneumatic lid for closing hook passage groove.

    Upper hook

  • Six options
    • CAB GF - Fixed Hook
    • CAB 1GM - mobile hook
    • CAB Y - Double hook
    • CAB TAM 2P - Double door
    • CAB OVAL - Multiple hooks
    • TUN - Continuous Overhead Rail blast machine
  • Manual or electric hook movement
  • Two hook positioning options
    • Without displacement
    • With displacement
  • Variable hook rotation speed

    Blast Wheel IMG_8989

  • Located strategically with a correct distribution of shot on the parts to be treated resulting in a better coverage and better performance of the machine
  • Direct drive from 10 HP up to 50 HP
  • Housing manufacture in MN (11-14%) steel Forming together with the internal liners and double resistant wear wall
  • High chrome steel Internal liners (?64RC ). Liners attached by screw with hardened cast steel head cover for abrasion protection
  • Positioning and fixing system for control cage, eliminates the risk of incorrect adjustment of the hot spot.
  • Labyrinth seal of abrasive between engine coupling and housing with possibility to mount the turbines in any position

    Abrasive recovery system

  • Bucket elevator with cast bucket – SAE 1035 steel
  • High efficiency Air flow abrasive cleaning
  • Storage hopper for good abrasive
  • Pneumatic Valves flow
  • Upper Screw - Spiral 15b30 boron-steel
  • Auger with self-cleaning rotary sieve, to automatically remove large particles that can be brought by the shot
  • Magna Valve – Amperage Electronic Control
  • Automatic Abrasive Regeneration System
  • Maintenance platform

    Dust collector

  • Steel construction:  3.2 mm thick
  • Cartridge media cleaning: reverse Pulse jet
  • Easy replacement of cartridges
  • Efficiency ? 0.5 micron / 99.9%
  • Emission <1 mg/m3
  • 200L dust accumulation drum with lid transition to drum with sleeve filter
  • Intermediate gravitational separator located between blast cabinet and dust collecto r allows for increasing the air flow inside the cabinet without risk of carrying good abrasive to the dust collector drum
  • Silencer and Mineral wool cover kit to reduce noise ? 85dBA a 1.52m
  • Maintenance platform

    Electrical Component

  • Control panel for operation control
  • Components and motors: according to customer requirement IEC, Nema, UL, etc.
  • PLC control:  Siemens
  • Emergency stop button: included
  • Wire cables to connect control panel and motors
  • Movement sensor motors
  • Cooling system (for maximal temperature: + 45 °c)
  • Soft Start motors

 


Technical Data – Spinner Hanger Batch Type - CAB

Technical Data – Overhead Rail Machine - TUN

 


Main uses and applications of Spinner Hanger Shot Blasting Machines

Tumble belt shot blasting equipment are very simple to operate and are used, among other applications, for the following processes

  • Surface preparation for paint, metal, rubber, etc.
  • Pickling of forgings or parts heat treated
  • Blasting Sanding of castings in ferrous and non-ferrous metals.
  • Deburring of metallic and non-metallic parts.
  • Elimination of oxides and scale
  • Shot Peening

 


Advantages in the use of Cym shot blasting machines

  • They process all kinds of parts, with high production volume and minimum operating cost.
  • Excellent homogeneity of completion in the processed parts
  • Automatic process, does not require specialized labor
  • Using continuous overhead rail blast machine allows to process parts in suspended load in line with painting processes
  • It does not contaminate the environment

 


Special project

In case the equipment you need is not on these pages, please contact our Engineering and Sales department, so they can help you develop the best equipment that meets your needs, seeking to reduce your operating costs and increase profitability your production systems  


Videos

 


Click on the image to download the brochure (PDF)

 

ADMINISTRACIÓN Y FÁBRICA
ARGENTINA

BRIG. ESTANISLAO LOPEZ N° 6
[S2108AIB] SOLDINI
SANTA FE - ARGENTINA
+54 341 4900 1100
info@cym.com.ar

ADMINISTRACIÓN Y FÁBRICA
BRASIL

RUA MÁRIO JUNQUEIRA DA SILVA Nº 684 - JD - EULINA
[CEP.13063-000] CAMPINAS - SP – BRASIL
+55 19 3242-9777 / +55 19 98144-2277
metalcym@metalcym.com.br

OFICINA COMERCIAL
BUENOS AIRES

EIZAGUIRRE 1073
[B1754FLA] SAN JUSTO
BUENOS AIRES - ARGENTINA
+54 11 3979-4111 / +54 9 11 3345-8578
cymba@cym.com.ar

 

TÜV Rheinland Argentina,S.A.